STEP 1: EMAIL email@example.com
STEP 2: Locate the hardware.
There are 2 cases:
Case 1: ENS ships the ENS Cube with 5-volt power adapter and its other sundries directly to the location.
Case 2: ENS ships the ENS cube with 5-volt power adapter and its other sundries directly to the installer.
Step 3: Install screen mounting bracket
Step 4: Install extension cord and/or power splitter
Step 5: Attach 8" of Raceway to the back of the screen
This is installed recessed approximately 5" from the right of the screen.
The objective is to have the media player hang by these cables, on the right side of the screen, for easy access. Alternatively you can tie strap the hdmi cable to the top of the vertical arm of the screen bracket.
The power cord for the ENS Cube is to be left outside of the Raceway.
Step 6: Run the HDMI cable and power cord from the Cube
Step 7: Attach Power Brick for the screen
Step 8: Mount the screen onto the wall
Step 9: Power on the screen and set input to HDMI
Step 10: Turn on hotspot on your mobile phone
Using your phone's hotspot, the media player connects to our servers. We then remotely program it to connect to client's wireless network.
Set your hotspot to SSID: ENS3 , Protocol: WPA2, Password: 12345678
Once you have the hotspot turned on, please call us at 250-483-4719 to confirm if the ENS Cube is "online" through your phone's tethering with active data.
Step 11: Connect the power cord to the media player/ENS Cube
Step 12: Lower the media player down the side of the screen
Step 13: Notify ENS that the media player is on and that the hardware installation is finished.
You may contact us via email at firstname.lastname@example.org or phoning us at 250-483-4719.
Step 14: Take pictures of the install.
While you're taking pictures, we will be remotely switching the media player from your phone's hotspot to the client's wireless.
We need these few minutes to complete our work - through your phone's hotspot - ergo why staying on location for a few minutes to take pictures is so important.
IMPORTANT: DO NOT LEAVE THE LOCATION IF ENS CUBE IS NOT CONFIRMED CONNECTED TO THE LOCATION'S INTERNET (via Ethernet or wireless) AND IF THE SCREEN IS NOT DISPLAYING CORRECTLY.
Have fun, take a few selfies with the digital sign!
Step 15: Email the pictures to ENS, close the job and leave the location
The time to complete this job should be 1 hour, 15 minutes maximum. Inform us immediately of any time overage. Your email with pictures are proof for a complete closure and success of the installation.